Réparez vos affaires Communauté Boutique

iPhone 14 Pro Max 后置摄像头组件替换

Anglais
Chinois

Conditions préalables au tutoriel

Tous les tutoriels prérequis doivent être traduits avant que cette traduction soit considérée comme complète.

iPhone 14 Pro Max 五角螺丝更换

三角撬片深度标记

iPhone 14 Pro Max 屏幕替换前提指南

Informations sur le tutoriel

= Terminé = Incomplet
    Use this guide to replace the rear-facing camera assembly in your iPhone 14 Pro Max.
    This guide was created using the ***A2894*** (international) model. If you're fixing a different iPhone 14 Pro Max model, there may be some visual discrepancies, but the procedure should be the same.
    ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Pro+Max|Answers community] for help.

      Étapes du tutoriel

      Étape 1 — 拧开相机盖的螺丝

      用Y000螺丝刀卸下固定后置摄像头组件盖的五颗螺丝。

      Étape 2 — 卸下后置摄像头盖

      摄像头盖的右上角有一个在手机边框下面的小的金属凸起部分。

      Étape 3 — 断开超广角和长焦镜头的连接

      使用撬棒将接口从插座上向上撬开，以断开超广角和长焦镜头的连接。

      Étape 4 — 断开广角镜头的连接

      使用撬棒将接口从插座中向上撬起，从而断开广角镜头的连接。

      Étape 5 — 撬起后置摄像头组件

      将撬棒的尖端插入后置摄像头组件的底部边缘下方。

      Étape 6 — 移除后置摄像头组件

      使用镊子或手指卸下后置摄像头组件。

      Vos contributions sont faites dans le cadre de la licence open source Creative Commons.