Aller au contenu principal

Cricut Maker vordere Klappe tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 8

Étape 8
Cricut Maker Front Door Replacement: étape 0, image 1 de 2 Cricut Maker Front Door Replacement: étape 0, image 2 de 2
  • Using a Phillips #1 screwdriver, remove one 10 mm screw from both sides of the machine. This will release wires that are screwed into the sides of device.

  • Once the screws are removed and wires detached, the main body can be lifted off the base, and set aside.

Benutze einen Kreuzschlitzschraubendreher #1 und entferne eine 10 mm Schraube an beiden Seiten des Geräts. Dadurch werden die Kabel gelöst, die an den Seiten des Geräts festgeschraubt sind.

Sobald die Schrauben ausgebaut und die Kabel abgelöst sind, kann das Hauptgehäuse vom Untergehäuse abgehoben und zur Seite gelegt werden.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.