Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.
Traduction de l’étape 1
Étape 1
-
Remove the single 3 mm screw that secures the port using a Phillips #0 screwdriver.
-
Disconnect the cable from the port by gently wiggling and pushing the plug away from the port.
-
Pull the disconnected cable upwards, and the rest of the power port will follow.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.