Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 2

Étape 2
Remove the following four screws securing the power supply to the rear case (size T8 or T10 depending on the exact model):
  • Remove the following four screws securing the power supply to the rear case (size T8 or T10 depending on the exact model):

  • Two 23.7 mm Torx screws

  • Two 7.3 mm Torx screws

卸下下列将电源与背壳固定的4个螺丝。

2个23.7 mm T10 螺丝

2个 7.3 mm T10 螺丝

[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws
[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.