Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Anglais
Français

Traduction de l’étape 6

Étape 6
I'm simulating screwing on the throttle to the carburetor by compressing the gold cylinder against the gray cap. As you can see, the spring compresses, and the throttle cable pops outward. When I twist the moped's throttle, the throttle cable goes inwards. I believe this is the desired action for the cable.
  • I'm simulating screwing on the throttle to the carburetor by compressing the gold cylinder against the gray cap. As you can see, the spring compresses, and the throttle cable pops outward.

  • When I twist the moped's throttle, the throttle cable goes inwards. I believe this is the desired action for the cable.

  • There are two problems, however:

  • Nothing pushes the throttle cable back out when I release the moped's throttle.

  • The throttle needle does not move, but to my understanding it should go upward when I apply the throttle.

  • Please check out my Answers question if you can help me solve this problem! Thanks a lot!

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.