Aller au contenu principal

iMac Intel 21,5" EMC 2544 iSight Kamera austauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 1

Étape 1
iMac Intel 21.5" EMC 2544 iSight Camera Replacement: étape 0, image 1 de 1
  • Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.

  • During reassembly, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.

Entferne die zwei 4,3 mm T5 Torx Schrauben, die die Kameraplatine oben am Rückgehäuse befestigen.

Achte beim Zusammenbau darauf, dass du diese Schrauben nicht zu fest eindrehst. Sie haben breite Köpfe und können dann die Kameraplatine nicht gut am Gehäuse befestigen.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.