Aller au contenu principal

Sostituzione fotocamera iSight iMac Intel 21.5" EMC 2544

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 1

Étape 1
iMac Intel 21.5" EMC 2544 iSight Camera Replacement: étape 0, image 1 de 1
  • Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.

  • During reassembly, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.

Rimuovi le due viti Torx T5 da 4,3 mm che fissano la scheda della fotocamera alla parte superiore del case posteriore.

Durante il rimontaggio, fa' attenzione a non stringere troppo queste viti. Hanno una spalla larga e non terranno la scheda della fotocamera stretta contro il case posteriore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.