Aller au contenu principal

iMac Intel 21.5インチ EMC 2544 iSightカメラの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
iMac Intel 21.5" EMC 2544 iSight Camera Replacement: étape 0, image 1 de 1
  • Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.

  • During reassembly, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.

背面の筐体上部にカメラの基板を固定している4.3 mm T5トルクスネジを2本外します。

再組み立ての際には、これらのネジをきつく締めすぎないようにご注意ください。このネジは大きな肩つきで、カメラ基板を強く背面の筐体に固定していません。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.