Traduire l'étape #7 - iBook G4 12" 800 MHz-1.2 GHz Upper Case Replacement - iFixit

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 18 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape précédente

Traduction de l’étape 7

Étape 7

Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.

Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.
Tip: the multi-coloured cable may be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.