Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.
Traduction de l’étape 2
Étape 2
Unfasten the heatsink
-
Use your Phillips screwdriver to remove the two 4.7 mm screws securing the top left and bottom left edges of the heatsink.
-
Use your Phillips screwdriver to fully loosen the eight captive screws securing the center of the heatsink.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.