Traduire l'étape #1 - iPod Nano 7th Generation Front Glass/Digitizer Replacement - iFixit

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Use the flat end of a spudger to push the home button gasket toward the center of the button to release the light adhesive.

Work your way around the home button in this manner until you can easily remove the button from the front glass.

Use the flat end of a spudger to push the home button gasket toward the center of the button to release the light adhesive.
Work your way around the home button in this manner until you can easily remove the button from the front glass.
To prevent tearing the gasket around the home button, do not pry the home button out until the adhesive has been sufficiently loosened.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.