Réparez vos affaires Communauté Boutique

Extracción de la tapa trasera

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Espagnol
Étape précédente Étape suivante

Traduction de l’étape 5

Étape 5
Back Cover Removal, Remove the motherboard cover: étape 0, image 1 de 2 Back Cover Removal, Remove the motherboard cover: étape 0, image 2 de 2
Remove the motherboard cover

  • Be very careful not to puncture the battery with your screwdriver.

  • Use a Phillips screwdriver to remove the nine 3.6 mm‑long screws securing the motherboard cover.

  • The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use tweezers to remove it.

Retira la tapa de la placa madre

Ten mucho cuidado de no perforar la batería con el destornillador.

Utiliza un destornillador Phillips para retirar los nueve tornillos de 3,6 mm de longitud que sujetan la tapa de la placa madre.

El tornillo situado cerca del centro del borde superior está cubierto por una pegatina. Pínchalo con el destornillador o utiliza unas pinzas para quitarlo.

[title] Remove the motherboard cover
[* icon_caution] Be very careful not to puncture the battery with your screwdriver.
[* red] Use a Phillips screwdriver to remove the nine 3.6 mm‑long screws securing the motherboard cover.
- [* icon_note] The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use tweezers to remove it.
+ [* icon_note] The screw near the center of the top edge is covered by a sticker. Pierce through it with your screwdriver, or use [product|IF145-020|tweezers] to remove it.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.