Logic Board Removal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Néerlandais

Étape précédente Étape suivante

Traduction de l’étape 7

Étape 7

Logic Board Removal: étape 0, image 1 de 3

Logic Board Removal: étape 0, image 2 de 3

Logic Board Removal: étape 0, image 3 de 3

Be very careful not to puncture the battery during this step.
Hold one hand above the display bracket when prying it up, as the bracket can easily eject.
Use the tip of one arm of your angled tweezers to pry up the top edge of the display cable bracket from the center of the logic board.
Be very careful not to damage the board under the bracket's socket. Only insert your tweezers just enough to pry up the bracket.
Remove the bracket.
During reassembly, hook the bottom edge of the bracket into its slot on the logic board and press down firmly on the top to snap the bracket back into place.
If your display cable bracket is bent and doesn't fit, replace it with a new one.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.