Aller au contenu principal
Anglais
Français

Traduction de l’étape 10

Étape 10
This step is for anti-glare display machines only. Skip this step if you have a glossy display. Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
  • This step is for anti-glare display machines only. Skip this step if you have a glossy display.

  • Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.

  • One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

  • Lift the AirPort board/cable retainer assembly out of the upper case.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.