Aller au contenu principal

iPhone 14の充電コイルアセンブリ交換

Anglais
Japonais

Traduction de l’étape 10

Étape 10
iPhone 14 charging coil assembly replacement, Camera glass inspection and glue: étape 0, image 1 de 3 iPhone 14 charging coil assembly replacement, Camera glass inspection and glue: étape 0, image 2 de 3 iPhone 14 charging coil assembly replacement, Camera glass inspection and glue: étape 0, image 3 de 3
Camera glass inspection and glue
  • As you can see the camera glass is protected with a red film from the inside. Do not use hard objects to remove it as you could scratch the glass.

  • Use cotton swabs or something similar to clean your camera lenses as well as the camera glass. If you forget this step your photos and videos might look off.

  • Reapply glue to the frame again before closing everything down. My battery came with an adhesive gasket that I used.

見てわかる通り、カメラのガラスは内側から赤いフィルムで保護されています。このフィルムを剥がす際は硬い道具を使わないで下さい。ガラスにこすり傷がつく恐れがあります。

綿棒などを使ってカメラガラスとともにカメラのレンズを掃除して下さい。この作業をしなかった場合、写真や動画の写りがおかしくなる可能性があります。

作業を完了する前に、フレームに新しい接着剤を取り付けて下さい。私が購入したバッテリーには接着ガスケットが付属していたので、そちらを使いました。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.