Aller au contenu principal

iPhone 16 Plus Glasrückseite tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 14 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 1

Étape 1
iPhone 16 Plus Back Glass Removal, Secure the screen: étape 0, image 1 de 3 iPhone 16 Plus Back Glass Removal, Secure the screen: étape 0, image 2 de 3 iPhone 16 Plus Back Glass Removal, Secure the screen: étape 0, image 3 de 3
Secure the screen
  • The next five steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down four steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • The Anti-Clamp applies suction to both the screen and the back glass. To open only the back glass, you need to secure the screen with tape.

  • Cut two strips of tape, apply them along the long edges of the phone, and fold them over the screen to secure it.

  • Make sure the tape is only securing the screen, and not the back glass.

Wir haben die Anti-Clamp entwickelt, um das Öffnen von Geräten zu erleichtern. Die nächsten drei Schritte zeigen, wie sie verwendet wird. Wenn du sie nicht benutzen willst, überspringe die nächsten drei Schritte und folge einer anderen Methode.

Genaue Anweisungen für die Anti-Clamp findest du hier.

Die Anti-Clamp wirkt auf beide Seiten, dem Display und dem Rückseitenglas. Wenn du nur das Rückseitenglas öffnen willst, musst du das Display mit einem Klebeband sichern. Genauere Angaben dazu findest du hier.

Schneide zwei Streifen des Klebebands ab und bringe sie an den langen Kanten des Smartphones an. Klappe sie über das Display, so dass es festgehalten wird.

Achte darauf, dass das Klebeband nur das Display sichert, nicht die Rückseite.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.