Pentax Spotmatic High Speed Shutter Mechanism Disassembly

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Pentax Spotmatic High Speed Shutter Mechanism Disassembly, Remove ISO detent ring: étape 0, image 1 de 2

Pentax Spotmatic High Speed Shutter Mechanism Disassembly, Remove ISO detent ring: étape 0, image 2 de 2

Remove ISO detent ring

Remove two 2.2 mm flat head screws.
Remove the detent ring.
Installation Notes: With the shutter speed selector set to 'B' (as it is in the pictures), the detents on the ring should point toward the prism. This will allow proper coupling with the shutter speed dial.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.