Réparez vos affaires Communauté Boutique

Sostituzione ventola Xbox Series X

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 21 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Italien
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Fan Removal, Disconnect the fan cable: étape 0, image 1 de 3 Fan Removal, Disconnect the fan cable: étape 0, image 2 de 3 Fan Removal, Disconnect the fan cable: étape 0, image 3 de 3
Disconnect the fan cable

  • Use your fingernails or a pair of angled tweezers to firmly grip the edges of the fan cable connector.

  • Grip your tweezers close the connector to get a better grip.

  • Pull the connector straight out of the socket to disconnect it.

  • If you're having trouble, gently rock the connector side to side to loosen it.

  • Always pull cables by their connectors and not the wires themselves.

  • During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

Scollega il cavo della ventola

Usa le dita o un paio di pinzette dalla punta arrotondata per prendere i bordi del connettore del cavo della ventola e tiralo verso l'alto per scollegarlo dal centro della struttura.

Tira sempre i cavi dai loro connettori e non dai cavi stessi.

Durante il rimontaggio, fai passare il cavo della ventola sotto la sua piccola guida sull'alloggio della ventola in modo che non interferisca con la copertura posteriore.

[title] Disconnect the fan cable
-[* black] Use your fingers or a pair of [product|IF145-020-4|blunt tweezers] to grip the edges of the fan cable connector, and pull up to disconnect it from the center chassis.
+[* black] Use your fingernails or a pair of angled tweezers to ''firmly'' grip the edges of the fan cable connector.
+ [* icon_note] Grip your tweezers close the connector to get a better grip.
+[* black] Pull the connector straight out of the socket to disconnect it.
+ [* icon_note] If you're having trouble, gently rock the connector side to side to loosen it.
[* icon_caution] Always pull cables by their connectors and not the wires themselves.
[* icon_reminder] During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.