Aller au contenu principal

Xbox Series X Vervanging van de ventilator

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 21 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 2

Étape 2
Fan Removal, Disconnect the fan cable: étape 0, image 1 de 3 Fan Removal, Disconnect the fan cable: étape 0, image 2 de 3 Fan Removal, Disconnect the fan cable: étape 0, image 3 de 3
Disconnect the fan cable
  • Use your fingernails or a pair of angled tweezers to firmly grip the edges of the fan cable connector.

  • Grip your tweezers close the connector to get a better grip.

  • Pull the connector straight out of the socket to disconnect it.

  • If you're having trouble, gently rock the connector side to side to loosen it.

  • Always pull cables by their connectors and not the wires themselves.

  • During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

Gebruik een pincet met botte einden om de zijkanten van de kabelaansluiting van de ventilator vast te pakken. Trek deze vervolgens omhoog om deze los te maken van het middelste chassis.

Probeer kabels altijd via de aansluitingen weg te trekken en niet aan de kabels zelf.

Zorg dat je de ventilatorkabel, tijdens het weer in elkaar zetten van de spelcomputer, in de kabelgoot in de ventilatorbehuizing drukt zodat deze niet in de weg van het achterste paneel zit.

[title] Disconnect the fan cable
-[* black] Use your fingers or a pair of [product|IF145-020-4|blunt tweezers] to grip the edges of the fan cable connector, and pull up to disconnect it from the center chassis.
+[* black] Use your fingernails or a pair of angled tweezers to ''firmly'' grip the edges of the fan cable connector.
+ [* icon_note] Grip your tweezers close the connector to get a better grip.
+[* black] Pull the connector straight out of the socket to disconnect it.
+ [* icon_note] If you're having trouble, gently rock the connector side to side to loosen it.
[* icon_caution] Always pull cables by their connectors and not the wires themselves.
[* icon_reminder] During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.