Aller au contenu principal

Xbox Series X ファンの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 21 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 3

Étape 3
Fan Removal, Remove the fan: étape 0, image 1 de 3 Fan Removal, Remove the fan: étape 0, image 2 de 3 Fan Removal, Remove the fan: étape 0, image 3 de 3
Remove the fan
  • Slide the fan out of its slot to remove it.

  • During reassembly:

  • Before installing the fan, make sure it's clean! Use a dust blower or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.

  • Use a finger to keep the fan blades steady—it makes them easier to clean.

  • Note that the fan can only be installed one way—make sure Master Chief is facing you.

ファンをスロットからスライドして取り出します。

再インストールの際には、ファンは一方向のみから取り付けます。ご注意ください。マスターチーフが手前に位置しているか確認してください。

ファンを交換する場合、新しいファンには、プラスチック製の取り付け用ブラケットが含まれていないかも知れません。このブラケットは4本のT10トルクスネジでファンに取り付けられています。これはこのガイドでは画像に写っていません。

[title] Remove the fan
[* black] Slide the fan out of its slot to remove it.
-[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
- [* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.
+[* icon_reminder] During reassembly:
+ [* black] Before installing the fan, make sure it's clean! Use a [product|IF145-064-2|dust blower|new_window=true] or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.
+ [* icon_note] Use a finger to keep the fan blades steady—it makes them easier to clean.
+ [* black] Note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.