Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront le tutoriel qui comprend cette étape.
Traduction de l’étape 2
Étape 2
-
Lift the two wires and plastic piece away from the Wi-Fi board.
-
Remove the single 3 mm screw holding the Wi-Fi board in place using a Phillips #0 screwdriver.
-
Hold the sides of the Wi-Fi board and slide it out of the socket.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.