Xbox Series X/S Wireless Controller Joystick Replacement

Anglais

Français

Traduction de l’étape 8

Étape 8

This step shows how to remove solder residue with a solder wick. If the potentiometer feels loose, skip this step.
Apply flux to the solder joint.
Lay a piece of clean solder wick over the solder joint.
Press the tip of your soldering iron over the wick so that the residue melts and transfers onto the wick.
Repeat the process with the remaining two solder joints.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.