Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 12
Étape 12
-
Roll the thermal putty into a ball.
-
Place the thermal putty where the damaged thermal pad was, making sure it's centered over the component—in this case a memory chip.
-
Optionally, you can use the flat end of a spudger (or an included applicator) to spread the thermal putty over the surface of the component.
| + | [* black] Roll the thermal putty into a ball. |
|---|---|
| + | [* black] Place the thermal putty where the damaged thermal pad was, making sure it's centered over the component—in this case a memory chip. |
| + | [* black] Optionally, you can use the flat end of a spudger (or an included applicator) to spread the thermal putty over the surface of the component. |
| + | [* icon_note] When you reattach the heat sink, you'll compress the thermal putty and it'll spread the ball out. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.