Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 13 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 7

Étape 7
Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable. Pull the digitizer ribbon cable straight out of its sockets on the logic board.
  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Pull the digitizer ribbon cable straight out of its sockets on the logic board.

Usa la parte piatta di uno spudger per separare l'adesivo sotto il cavo a nastro del digitizer.

Sfila il cavo a nastro del digitizer dalle sua prese sulla scheda madre.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.