Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Remove the rubber capsule located on the upper left hand side above the fan. Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver. Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver.
  • Remove the rubber capsule located on the upper left hand side above the fan.

  • Remove the two 3.8mm screws located on the power management board with a PH1 Philips head screw driver.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.