Traduire l'étape #2 - AirPort Extreme A1521 Internal Structure Replacement

Info : Vous modifiez actuellement un pré-requis du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 5 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.

To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it away from the center of the device.

Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it away from the center of the device.
To detach the large clip from its connector, place the flat end of the spudger on the clip and lever it upward out of the connector.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.

Traduction de l’étape 2

Raccourcis pour la modification des étapes du tutoriel :