Aller au contenu principal

Info : Vous modifiez actuellement un pré-requis du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 1

Étape 1
Remove the power supply cable from its connector by pulling it parallel to the logic board. During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.
  • Remove the power supply cable from its connector by pulling it parallel to the logic board.

  • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Retirez la nappe du bloc d'alimentation de son connecteur en la tirant parallèlement à la surface de la carte mère.

[* black] Remove the power supply cable from its connector by pulling it parallel to the logic board.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.