Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Français

Traduction de l’étape 1

Étape 1
Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip. Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up. Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.
  • Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip.

  • Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up.

  • Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.