Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 1

Étape 1
Use tweezers to remove the volume rocker and power buttons from the display assembly. During reassembly make sure the orientation of the buttons is correct. The rubber backings must fit into the channels in the assembly. During reassembly make sure the orientation of the buttons is correct. The rubber backings must fit into the channels in the assembly.
  • Use tweezers to remove the volume rocker and power buttons from the display assembly.

  • During reassembly make sure the orientation of the buttons is correct. The rubber backings must fit into the channels in the assembly.

Entferne den Lautstärke-Wippaschalter und die Einschalttasten mit einer Pinzette von der Displayeinheit.

Beim Wiederzusammenbau gehe sicher, dass die Tasten richtig ausgerichtet sind. Die Gumirücken müssen in die Kanäle in der Einheit passen.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.