Traduire l'étape #14 - PowerBook G4 Aluminum 17" 1-1.67 GHz LCD Replacement - iFixit

Annuler

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 14

Étape 14

Insert a plastic opening tool between the metal LCD frame and the front bezel.

Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.

Insert a plastic opening tool between the metal LCD frame and the front bezel.
Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.
It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool.
Use the flat end of a metal spudger to gently pry up the adhesive securing the metal LCD frame to the front bezel, taking special care not to scratch the LCD panel.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.