Traduire l'étape #2 - Dual USB Connector Teardown - iFixit

Annuler

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Use a Phillips #1 screwdriver to remove the four screws from the white casing and the two screws from the metal bar (and keep track of the location of these screws).

The solder on the bottom can cut skin!

Use a Phillips #1 screwdriver to remove the four screws from the white casing and the two screws from the metal bar (and keep track of the location of these screws).
The solder on the bottom can cut skin!
The four LED lights. flash when usage.
The two USB ports are High Speed.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.