Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Anglais
Italien

Traduction de l’étape 4

Étape 4
With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board and place aside.
  • With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board and place aside.

  • Lift the LCD display away from the camera and again carefully remove two ribbon cables and place aside.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.