Aller au contenu principal
Anglais
Français

Traduction de l’étape 3

Étape 3
Remove printed circuit board, LED, battery, and motor assembly from the screwdriver casing. Use a soldering iron to melt the solder from the LED's two pins on the printed circuit board. Remove the LED from the circuit board while the solder is still melted.
  • Remove printed circuit board, LED, battery, and motor assembly from the screwdriver casing.

  • Use a soldering iron to melt the solder from the LED's two pins on the printed circuit board.

  • Remove the LED from the circuit board while the solder is still melted.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.