Aller au contenu principal
Anglais
Français

Traduction de l’étape 4

Étape 4
Place the positive leg of the new LED through the positive hole in the printed circuit board and solder it into place. Place the negative leg of the LED through the negative hold in the printed circuit board and solder it into place.
  • Place the positive leg of the new LED through the positive hole in the printed circuit board and solder it into place.

  • Place the negative leg of the LED through the negative hold in the printed circuit board and solder it into place.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.