Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Japonais

Traduction de l’étape 5

Étape 5
Remove the following screws securing the logic board to the rear case:
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.3 mm Phillips screws

  • Three 2.7 mm standoff screws

  • Standoff screws are best removed using an iPhone Standoff Screwdriver Bit and driver handle.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

背面ケースに留められたロジックボードから次のネジを外します。

2.3 mm プラスネジー2本

2.7 mmスタンドオフネジー3本

これらのネジはプラスネジのビットパターンですが、一番便利なツールは2.5 mmマイナスドライバーです。

スタンドオフネジを再装着する際は、スパッジャーの先端をスクリュードライバーのようにして使うと便利です。

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.3 mm Phillips screws
[* orange] Three 2.7 mm standoff screws
[* icon_note] TheseStandoff screws have a Phillips bit pattern, but we found theare best removal tool to beremoved using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In
a 2.5 mmpinch, a small flathead driver.
[* icon_reminder] When putting
screwdriver will do the standoffs back in, it helps tojob—but use the tip of a spudger like a screwdriverextra caution to get them startedensure it doesn't slip and damage surrounding components.
[* icon_note] TheseStandoff screws have a Phillips bit pattern, but we found theare best removal tool to beremoved using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In
a 2.5 mmpinch, a small flathead driver.
[* icon_reminder] When putting
screwdriver will do the standoffs back in, it helps tojob—but use the tip of a spudger like a screwdriverextra caution to get them startedensure it doesn't slip and damage surrounding components.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.