Aller au contenu principal
Anglais
Français

Traduction de l’étape 13

Étape 13
Remove the 2 retaining screws from the top bezel (located where the keyboard used to be). Detach the touchpad and touch inductive panel cables from the system board (there are no fasteners on these cables, just pull them free from the sockets). Detach the LVDS cable from the system board by gently lifting the tape and pulling to the right to unplug the cable.
  • Remove the 2 retaining screws from the top bezel (located where the keyboard used to be).

  • Detach the touchpad and touch inductive panel cables from the system board (there are no fasteners on these cables, just pull them free from the sockets).

  • Detach the LVDS cable from the system board by gently lifting the tape and pulling to the right to unplug the cable.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.