Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Anglais
Français

Traduction de l’étape 11

Étape 11
Place a heavy object on the board to keep it from sliding around on the table. Rest the iron between the extruding battery holder tab and the corresponding solder pad to begin heating them up.
Solder the battery holder
  • Place a heavy object on the board to keep it from sliding around on the table.

  • Rest the iron between the extruding battery holder tab and the corresponding solder pad to begin heating them up.

  • The junction will not heat up immediately. It is necessary to hold the iron in place for about 20-30 seconds before sufficiently hot.

  • Applying pressure to the junction, as opposed to simply laying the iron, will improve heat conductivity. This will speed up the process and result in a better solder joint.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.