Aller au contenu principal

Reemplazo del panel frontal del iPad Air Wi-Fi

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 76 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 23

Étape 23
iPad Air Wi-Fi Front Panel Replacement: étape 0, image 1 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 2 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 3 de 3
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • The third image shows the two antennas and the home button cavity in the lower case of the iPad.

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Desliza la púa inferior izquierda hacia la esquina inferior izquierda para cortar el adhesivo en esa esquina.

Deja la púa en la esquina. No hagas palanca más y no quites la púa del iPad.

La tercera imagen muestra las dos antenas y la cavidad del botón de inicio en el cuerpo del iPad.

Los siguientes pasos te indicarán dónde hacer palanca para evitar daños a estos componentes. Solo aplica calor y haz palanca donde se te indique.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.