Aller au contenu principal

iPad Air Wi-Fi Vervanging van het voorste paneel

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 76 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 24

Étape 24
iPad Air Wi-Fi Front Panel Replacement: étape 0, image 1 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 2 de 3 iPad Air Wi-Fi Front Panel Replacement: étape 0, image 3 de 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

Laat de plectrum uit de laatste stap op z'n plek zitten om te voorkomen dat de lijm zich opnieuw aan het toestel hecht.

Pak een nieuwe plectrum en schuif deze voorzichtig over de linkerantenne heen. Stop met schuiven voor de thuisknop.

Schuif je plectrum enkel van buiten naar binnen en niet andersom. Als je dat wel doet, riskeer je de antenne te beschadigen.

Als je je plectrum meerdere keren moet gebruiken om de lijm door te snijden, verwijder je je plectrum, steek je deze aan de buitenkant weer in de opening en schuif je deze van buiten naar binnen.

Laat je plectrum op z'n plek zitten voordat je verdergaat.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.