Aller au contenu principal

Reemplazo del LCD del iPad Air Wi-Fi

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 28 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 3

Étape 3
iPad Air Wi-Fi LCD Replacement: étape 0, image 1 de 3 iPad Air Wi-Fi LCD Replacement: étape 0, image 2 de 3 iPad Air Wi-Fi LCD Replacement: étape 0, image 3 de 3
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on its face to allow access to the display cables.

  • Set the LCD down on a soft, clean, lint-free surface.

No intentes quitar completamente la pantalla LCD. Todavía está conectado al iPad por varios cables en el extremo del botón de inicio. Levanta solo desde el extremo frontal de la cámara.

Usa el extremo plano de un spudger para sacar la pantalla LCD de su hueco lo suficiente como para agarrarla con los dedos.

Voltea el iPad LCD como una página en un libro, levanta cerca de la cámara y gíralo sobre el botón de inicio de la carcasa trasera.

Sé gentil y vigila los cables de la pantalla LCD mientras volteas la pantalla.

Reposa la pantalla LCD sobre su superficie para permitir el acceso a los cables de la pantalla.

Coloca la pantalla LCD sobre una superficie suave, limpia y sin pelusas.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.