Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 32

Étape 32
Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive. While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
  • Insert a plastic opening tool in the rectangular gap in the upper area of the logic board, and pry the logic board up from the rear case.

  • While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.

Inserisci uno strumento di apertura di plastica nell'incavo rettangolare sopra la scheda logica e fai leva per sollevare la scheda logica dal case posteriore.

Mentre mantieni lo strumento di apertura sotto la scheda logica, fallo scorrere per ltutta la lunghezza dell'incavo per staccare la parte superiore della scheda logica dall'adesivo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.