Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 8 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 33

Étape 33
Pry up the logic board at the lower edge of the rectangular gap, near the EMI shield. Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener. Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.
  • Pry up the logic board at the lower edge of the rectangular gap, near the EMI shield.

  • Lift the end of the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.

Hebele das Logic Board am unteren Ende der rechteckigen Öffnung in der Nähe der EMI Abschirmung hoch.

Hebe nur ganz langsam hoch. Wenn du einen Widerstand spürst, halte an und benutze wieder den iOpener.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.