Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Allemand

Traduction de l’étape 2

Étape 2
To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries. Plug the black probe into the COM port on your multimeter.
  • To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

  • Plug the black probe into the COM port on your multimeter.

  • Plug the red probe into the VΩmA port.

Stelle sicher, dass kein elektrischer Strom durch den Stromkreis oder die Komponenten, die du testen willst, fließt.

Stecke die schwarze Messleitung in den COM Port an deinem Multimeter.

Stecke die rote Messleitung in den VΩmA Port ein.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.