Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Espagnol

Traduction de l’étape 2

Étape 2
To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries. Plug the black probe into the COM port on your multimeter.
  • To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

  • Plug the black probe into the COM port on your multimeter.

  • Plug the red probe into the VΩmA port.

Para empezar, asegúrese de que no circula corriente por el circuito o componente que desea probar. Apáguelo, desenchúfelo de la pared, y retire las baterías.

Conecte la sonda negra en el puerto COM en su multímetro.

Conecte la sonda roja en el puerto VΩmA

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.