Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Italien

Traduction de l’étape 2

Étape 2
To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries. Plug the black probe into the COM port on your multimeter.
  • To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

  • Plug the black probe into the COM port on your multimeter.

  • Plug the red probe into the VΩmA port.

Per cominciare assicurati che nessuna corrente stia attraversando il circuito o il componente che vuoi testare. Spegnilo, staccalo dalla spina e rimuovi le batterie.

Inserisci il puntale nero nel foro COM sul tuo multimetro.

Inserisci il puntale rosso nel foro VΩmA.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.