Réparez vos affaires Communauté Boutique

加热iOpener

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 444 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente

Traduction de l’étape 4

Étape 4
iOpener Heating, Alternate iOpener heating method: étape 0, image 1 de 2 iOpener Heating, Alternate iOpener heating method: étape 0, image 2 de 2
Alternate iOpener heating method

  • If you don't have a microwave, follow this step to heat your iOpener in boiling water.

  • Fill a pot or pan with enough water to fully submerge an iOpener.

  • Heat the water to a boil. Turn off the heat.

  • Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.

  • Use tongs to extract the heated iOpener from the hot water.

  • Thoroughly dry the iOpener with a towel.

  • The iOpener will be very hot, so be careful to hold it only by the end tabs.

  • Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

加热iOpener的替代方案

如果你没有微波炉，请按照此步骤在沸水中加热iOpener。

在锅或平底锅里装满足够的水来完全淹没iOpener。

把水加热到沸腾。关火。

将iOpener放入热水中2-3分钟。确保iOpener完全浸入水中。

用钳子从热水中提取加热的iOpener。

用毛巾彻底擦干iOpener。

iOpener会很燙，所以拿取時請小心的從iOpener的邊邊拿

你的iOpener已准备好使用！如果你需要重新加热iOpener，请将水加热到沸点，关火，并将iOpener放入水中2-3分钟。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.