Réparez vos affaires Communauté Boutique

加热iOpener

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 444 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
iOpener Heating: étape 0, image 1 de 1

  • Heat the iOpener for thirty seconds.

  • Depending on the wattage of your microwave, more or less time may be required. The iOpener is sufficiently heated when it's barely too hot to touch.

  • Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.

  • Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. Do not attempt to heat over 100˚C (212˚F).

  • Never touch the iOpener if it appears swollen.

  • If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.

加热iOpener三十秒

在整个维修过程中，如果iOpener 冷却了，在微波炉中每次重新加热额外的三十秒。

注意在维修过程中不要过度加热iOpener，过热可能会导致iOpener爆炸。不要试图加热超过100摄氏度。

如果iOpener过热膨胀，千万不要触碰iOpener。

如果iOpener中间部分依然烫的没法碰，请等待冷却后再使用，加热好的iOpener 应该可以保持热度十分钟

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.