Aller au contenu principal
Anglais
Français

Traduction de l’étape 20

Étape 20
The heatsink is attached to the logic board by these screws. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.
  • The heatsink is attached to the logic board by these screws.

  • The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.