Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 7

Étape 7
Insert the tip of a spudger underneath the connector end of the microphone ribbon cable and slide it toward the screw post to free that half from the upper case. If the microphone is very resistant to prying, try heating it with an iOpener. Heating it will soften the adhesive and minimize the risk of tearing the cable. If the microphone is very resistant to prying, try heating it with an iOpener. Heating it will soften the adhesive and minimize the risk of tearing the cable.
  • Insert the tip of a spudger underneath the connector end of the microphone ribbon cable and slide it toward the screw post to free that half from the upper case.

  • If the microphone is very resistant to prying, try heating it with an iOpener. Heating it will soften the adhesive and minimize the risk of tearing the cable.

将撬棒的尖头插到麦克风排线的接头处以下,滑向螺丝方向来使其一半脱离上部机身(C壳)。

如果麦克风太紧挑不开,试试用iOpener给它加一下热。加热可以使胶变松并最小化扯破排线的风险。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.