Aller au contenu principal
Anglais
Français

Traduction de l’étape 5

Étape 5
Use the center screw hole of the volume control bracket to tilt it out toward the edge of the case and then pull it up out of its recess. Do not remove the bracket entirely as it is still attached to the button ribbon cable. Do not remove the bracket entirely as it is still attached to the button ribbon cable.
  • Use the center screw hole of the volume control bracket to tilt it out toward the edge of the case and then pull it up out of its recess.

  • Do not remove the bracket entirely as it is still attached to the button ribbon cable.

Utilisez le trou de la vis centrale du support de contrôle du volume pour saisir le support, l'incliner vers le bord de la coque, puis le retirer de son emplacement.

Ne retirez pas complètement le support, car il est toujours attaché à la nappe du bouton.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.